The number one purpose of any mortar and pestle set is to grind solids into fine powders but under conditions that are highly controlled as to not produce any heating effects and to minimize and control any effects due to stretching of sometimes deformable materials. This is probably the most ancient device one is likely to find in a modern scientific laboratory or kitchen. Because of the ability to control the grinding, and also to virtually eliminate contamination from the mortar and pestle set itself, agate is the preferred material and is used in laboratories and the finest kitchens worldwide to prepare delicate sauces and pastes and for the grinding of dried spices and herbs. From a cross-contamination and cleanliness (hygiene) standpoint if in the kitchen, the high density agate is far more desirable than the more porous porcelain which could grow bacteria in the pores and present a health problem. If a mortar and pestle of metal construction is used, it is generally recognized that metal particles enter the ground powder, thereby presenting either a health concern or else a contaminant is precision scientific measurements are to be made on the ground powder.

The number one purpose of any mortar and pestle set is to grind solids into fine powders but under conditions that are highly controlled as to not produce any heating effects and to minimize and control any effects due to stretching of sometimes deformable materials. This is probably the most ancient device one is likely to find in a modern scientific laboratory or kitchen. Because of the ability to control the grinding, and also to virtually eliminate contamination from the mortar and pestle set itself, agate is the preferred material and is used in laboratories and the finest kitchens worldwide to prepare delicate sauces and pastes and for the grinding of dried spices and herbs. From a cross-contamination and cleanliness (hygiene) standpoint if in the kitchen, the high density agate is far more desirable than the more porous porcelain which could grow bacteria in the pores and present a health problem. If a mortar and pestle of metal construction is used, it is generally recognized that metal particles enter the ground powder, thereby presenting either a health concern or else a contaminant is precision scientific measurements are to be made on the ground powder.

Agate Mortar and Pestle
Material: Pure and natural agate
Size : 6 cm
Features: Extreme hardness Corrosion resistant Acid and alkali resistant This product is mainly used for the grinding a few samples or analyzing the laboratory apparatus，and grinding the solid matter or carrying on the powder to trace solid mixing. Characteristic: 1.The products are flawless,having no impurity,the strong grinding ability 2.High—quality glossiness,corrosion resistance,in the acid abrasive substance. Use:Grind the solid or make the solids mixing Warna mungkin bisa berbeda satu sama lainnya

gate Mortar and Pestle

Material: Pure and natural agate
Size in : 15 cm
Features:
Extreme hardness
Corrosion resistant
Acid and alkali resistant

This product is mainly used for the grinding a few samples or analyzing the laboratory apparatus，and grinding the solid matter or carrying on the powder to trace solid mixing.

Characteristic:
1.The products are flawless,having no impurity,the strong grinding ability
2.High—quality glossiness,corrosion resistance,in the acid abrasive substance.

Use:Grind the solid or make the solids mixing
Warna mungkin bisa berbeda satu sama lainnya

Autoclave Hydrothermal Reactor for Hydrothermal Synthesis Bahan Stainless steel 304 Lining PTFE Max Temp :220C Max pressure 3 Mpa The hydrothermal synthesis reactor using high-quality stainless steel processing. Kettle kettle lid body and sealed with durable, reliable cable seal structure, the sealing effect long-term stability without leakage. The hydrothermal synthesis reactor with external heating, to reduce the volume and more favorable reaction in the same reactor operating temperature (such as multiple reactor placed in an oven heated).

HYDROTHERMAL AUTOCLAVE FOR HYDROTHERMAL SYNTESIS REACTOR 100 ml Material : High-quality nonmagnetic 304 stainless steel Max pressure : 3 Mpa ( 30 Bar ) Dimensi : Panjang 9,3 cm Diameter 4,9 cm Complete with 2 Pcs LIner PPL dan PTFE 50 ml Material PPL Safe operation temp 260C Max temperature 280C Max Pressure 3 MPa Material PTFE Safe operation 220C Max temperature 230C Max pressure 3 MPa Application : can be used in the digestion of lead, copper, cadmium, zinc, calcium, manganese, iron, mercury and other heavy metals The Hydrothermal Autoclave Reactor use to carry hydrothermal reaction at high pressure and high temperature. This product extensively used in the scientific laboratory, research and development labs, institutional organizations, quality analysis section in industries etc. The Teflon-lined hydrothermal synthesis autoclave is corrosive resistant. It is also acidic and alkaline resistant hence used for highly alkaline and acidic solutions. The autoclave for hydrothermal synthesis mostly used for crystallization processes and nanoparticles. Since it is operating at a very high temperature and high pressure, hence it is also called as the hydrothermal bomb. Hydrothermal laboratory reactor available with a pressure gauge to maintain appropriate pressure condition required for the chemical reaction. It also comes with features of self-heating with all heating arrangement.

PPL Liner Autoclave Hydrothermal Synthesis Chamber Bahan PPL Kapasitas 100 ml Safe operation temp 260C Max temperature 280C Max Pressure 3 MPa Dimensi : Panjang 9,3 cm Diameter 4,9 cm Application : can be used in the digestion of lead, copper, cadmium, zinc, calcium, manganese, iron, mercury and other heavy metals

PL Liner Autoclave Hydrothermal Synthesis Chamber

Bahan PPL
Kapasitas 50 ml
Safe operation temp 260C
Max temperature 280C
Max Pressure 3 MPa

Dimensi :
Panjang 7,9 cm
Diameter 3,9 cm

Application : can be used in the digestion of lead, copper, cadmium, zinc, calcium, manganese, iron, mercury and other heavy metals

PTFE Teflon Lined For Hydrotermal Autoclave Chamber 100 ml
Material : High quality Teflon PTFE Maximum operating temperature: 230C Safe temperature : 220 Celsius degrees, Max pressure : 3MPa/ 30 bar Heating and Cooling Rate : ≤5°C/min Maximum Operating Temperature : 220 C Dimensi : Panjang 9,3 cm Diameter 4,9 cm Inner PTFE (Teflon Liner) Chamber. Application : can be used in the digestion of lead, copper, cadmium, zinc, calcium, manganese, iron, mercury and other heavy metals

PTFE Teflon Lined For Hydrotermal Autoclave Chamber 50 ml Material High quality Teflon PTFE Maximum operating temperature: 240C Safe temperature: 220C Working Pressure: 3MPa or 30 Bar Heating and Cooling Rate: 5C/min Dimensi : Panjang 7,9 cm Diameter 3,9 cm inner PTFE (Teflon Liner) Chamber. Application : can be used in the digestion of lead, copper, cadmium, zinc, calcium, manganese, iron, mercury and other heavy metals

PTFE Teflon Lined For Hydrotermal Autoclave Chamber 250 ml Material : High quality Teflon PTFE Safe temperature : 220 Celsius degrees, Max pressure : 3MPa/ 30 bar Heating and Cooling Rate : ≤5°C/min Maximum Operating Temperature : 220 C Dimensi : Diameter 6,3 cm Panjang 13,5 cm Inner PTFE (Teflon Liner) Chamber. Application : can be used in the digestion of lead, copper, cadmium, zinc, calcium, manganese, iron, mercury and other heavy metals

PTFE Teflon Lined For Hydrotermal Autoclave Chamber 25 ml Brand Ningbo Material High quality Teflon PTFE Maximum operating temperature: 240C Safe temperature: 220C Working Pressure: 3MPa or 30 Bar Heating and Cooling Rate: 5C/min Dimensi : Panjang 6,1 cm Diameter 3,4 cm inner PTFE (Teflon Liner) Chamber. Application : can be used in the digestion of lead, copper, cadmium, zinc, calcium, manganese, iron, mercury and other heavy metals

High Purity Alumina Crucible For Lab Sample Preparation Alumina or aluminum oxide (Al2O3) in its various levels of purity is used more often than any other advanced ceramic material. Tigar Ceramic offers a wide range of material types with different property profiles that can be adjusted via a targeted matrix design. This material has very high hardness, very high stiffness, very good corrosion resistance to chemicals at high temperature, and very high refractoriness or use temperature. The applications for alumina advanced ceramics are heavy-duty forming tools, substrates and resistor cores in the electronics industry, tiles for wear protection and ballistics, thread guides in textile engineering, seal and regulator discs for valves, heat-sinks for lighting systems, protection tubes in thermal processes or catalyst carriers for the chemicals industry. Volume : 100 ml Material : Alumina Ceramic Color : White or light pink or light yellow Density : 3.70-3.90g/cm3 Raw material: 95% or 99.7% alumina ceramic Feature : High Temperature Resistance

High Purity Alumina Crucible For Lab Sample Preparation Alumina or aluminum oxide (Al2O3) in its various levels of purity is used more often than any other advanced ceramic material. Tigar Ceramic offers a wide range of material types with different property profiles that can be adjusted via a targeted matrix design. This material has very high hardness, very high stiffness, very good corrosion resistance to chemicals at high temperature, and very high refractoriness or use temperature. The applications for alumina advanced ceramics are heavy-duty forming tools, substrates and resistor cores in the electronics industry, tiles for wear protection and ballistics, thread guides in textile engineering, seal and regulator discs for valves, heat-sinks for lighting systems, protection tubes in thermal processes or catalyst carriers for the chemicals industry. Volume : 20 ml Material : Alumina Ceramic Color : White or light pink or light yellow Density : 3.70-3.90g/cm3 Raw material: 95% or 99.7% alumina ceramic Feature : High Temperature Resistance

Biosharp cell freezing container, in combination with a -80°C freezer, will provide alcohol-free freezing at the rate of -1°C/minute that is ideal for cryopreservation of most cells and cell lines.
BS-02-CFC


Features:
1. Ease of use
2. Alcohol and fluid-free freezing
3. Lower cost of use than alcohol-based devices
4. High cell recovery and cell viability
5. Reproducibility
6. Provide alcohol-free freezing at the rate of -1°C/minute

This product is designed for manual spreading of agar plate in petri dish, which is mainly used in the fields of molecular biology and microbiology. Features - Manual operation, easy to control; - Antiskid design, easy to handle; - Double sides usable, two work spaces in one device; - Compatible with different sizes of petri dish. Operation Place culture plate on the suitable work space, add sample and rotate the work platform to spread evenly with the L-spreader. Warranty One year limited warranty. It is not suitable for damage caused by improper use. Technical Data Cat.No DS-M Petri Dish Size (Φ) 90-150mm Rotate Mode Manual Work Plate 2 Sides Dimensions (Φ*H) 160 * 50 mm Weight ~2.4kg

Biosharp CoolBox are provide sample cooling without ice, electricity or batteries. Multiple specifications are available. The modular design enables to hold microfuge tubes, PCR tubes and more. It is especially suitable for keeping low temperature when preparing various solutions to prevent degradation and pollution during operation.


Features:
1. Suitable for 0.2ml 96-well PCR plate
2. Polypropylene material
3. Size: 132x94x42mm / 132(L)*94(W)*42mm(H)
4. Initial storage conditions: -20℃, 12-24h
5. Provides over 1-2 hours of 0.5 to 4℃ cooling with lid closed

Description
The Nalgene 2125-4000 heavy-duty HDPE bottle is used to store and ship liquids or dry chemicals. These large, thick-walled and wide-mouthed bottles with closure are specially designed for extra-rugged use. The white polypropylene linerless closures are leakproof and autoclavable.
eature:


White polypropylene linerless closures are leakproof†
Includes:


White polypropylene screw caps
Dimensions:


Closure Size: 83B
Diameter: 155 mm
Height: 338 mm
Diameter Inner Neck: 65 mm
Specifications:


Certifications/Compliance: Manufactured in compliance with ISO 13485:2016 quality requirements. Bottles and Closures meet the requirements of 21CFR177.1520 for food and beverage use, USP Class VI.
Closure Included: Yes
Closure Liner: Linerless
Closure Material: Polypropylene
Closure Type: Screw Closure (Assembled)
Mouth: Wide
Shape: Round
Through the Closure Dispensing: No
Capacity: 4 L
Color: Natural
Description: Heavy-Duty Bottles
Material: HDPE
Type: Heavy-Duty Bottle
Closure Color: White

Dewar Flask 1L, NALGENE
Cat. no. 4150-1000
Description:
High density polyethylene base and HDPE cover with polyethylene coated handle for strong, shatterproof performance Double-walled sides and CFC-free foam urethane insulation minimize heat leakage so samples stay cold longer Can be used from -196C to +100C Pour spout and bottom grip area for ease of removal of used liquids Vented, insulated cover allows for vapor escape but maintains sample temperature

Specifications :
Capacity (Metric) 1L Depth (Metric) Interior 195mm Depth (English) Interior 7.7 in. Diameter (Metric) Inner Mouth 96mm Diameter (English) Inner Mouth 3.8 in. Height (Metric) 251mm Height (English) 9.9 in. No. per Pack 1

High Purity Alumina Crucible For Lab Sample Preparation Alumina or aluminum oxide (Al2O3) in its various levels of purity is used more often than any other advanced ceramic material. Tigar Ceramic offers a wide range of material types with different property profiles that can be adjusted via a targeted matrix design. This material has very high hardness, very high stiffness, very good corrosion resistance to chemicals at high temperature, and very high refractoriness or use temperature. The applications for alumina advanced ceramics are heavy-duty forming tools, substrates and resistor cores in the electronics industry, tiles for wear protection and ballistics, thread guides in textile engineering, seal and regulator discs for valves, heat-sinks for lighting systems, protection tubes in thermal processes or catalyst carriers for the chemicals industry. Volume : 30 ml Material : Alumina Ceramic Color : White or light pink or light yellow Density : 3.70-3.90g/cm3 Raw material: 95% or 99.7% alumina ceramic Feature : High Temperature Resistance