Thermostatic Water Baths DK-2000-IIIL 2 Row amp; 6 holes (Stretching Inner Chamber) Brand Faithful Classification Specifications : Model = DK-2000-IIIL - 2 row amp; 6 holes Heating Mode = Nature water convection heat transfer Function = Temp. Range = RT+5～100℃ Temp. Resolution = Ratio = 0.1℃ Temp. Motion = ±0.5℃ Temp. Uniformity = ±1.0℃ Structure = Inner Chamber = Stainless steel Outer Shell = Cold - rolled steel plate, resistance to chemical reagents coating on the surface Heater = Stainless steel heating tube Power Rating = 1.5kW Controller = Temp. Control Mode = PID (without DK-98-II) Temp. Setting Mode = Touch button setting Temp. Display Mode = Measuring temperature displays on the three digital tubes upper row, set temperature displays on the lower row Timer = 0～9999min（with timing wait function） Operation Function = Fixed temperature operation, timing function, auto stop. Program Mode = Optional Additional Function = Deviation Correction, menu key locked, power failure back-up, power-off memory Sensor = CU50 Safety Device = Over temperature alarm Specifikation = Inner Chamber size(W*L*H) (mm) = 500*300*150 Exterior size (W*L*H)(mm) =524*322*210 Packing size (W*L*H)(mm) = 600*390*280 Volume = 22.5L Load per rack = 5kg Shelf Number 1 Power Supply 50/60Hz) Current rating = AC220V/6.8A NW/GW (kg）= 7.5/9

Ultrasonic Cleaner Digital Model, With Timer And Heater Brand : FAITHFUL , Model : FSF-040S 1.Use ordinary tap water, alcohol or solvent as cleaning; 2.High power transducer cleaning effect significantly; usable macroscopic observation; 3.After cleaning objects shine light; 4.Digital LCD control boot time; 5.The stainless steel shell, bladder and cover, more upscale; 6.Waterproof properties is greatly improved,more safely products last; 7.With constant temperature system with heating; 8.The stainless steel ultrasonic cleaning basket (optional). Model FSF-040S Frequency : 40KHz Transducer (PCS) : 4 Capacity : 10 L Tank size (L*W*H MM) : 300*240*150 Unit size (L*W*H MM) : 325*265*280 Heating Power : 450W Ultrasonic Power(W) : 240 Timer : 0-30min Heater : RT-80℃

Ultrasonic Cleaner Stainless Steel Digital timing temperature and power regulating Brand Faithful Model FS-031S The ultrasonic bath has a stainless steel tank, It has wear resistance and long service life. Tank capacity 6.5 liters, with digital timer and heater control. With stainless steel basket. Use only tap water, or industrial alcohol and solvent cleaner for more cleaning. Industrial control chip microcontroller, flexible circuit board control, safer and more stable. Adjustable temperature 20 ° C a 90 ° C. With drainage Heating : up to 90 ºC Frequency : 40 khz Capacity : 6,5 L Heating power : 150 W Ultasonic Power : 180 W Ultrasound frequency : 40 kHz Tank dimensions : 300 x 150 x 150 mm external dimensions : 325 x 180 x 280 mm

Digital Magnetic Stirrer With Water Bath
Model WB-6S/WBS-6pro
Capacity 100-1200 RPM for model WBS-6pro Power 800W
1.Anti-dry technology
2. Double magnetons stirring · More uniform distribution of temperature
3. Built-in heating pipe · Safety experiment
4. Stainless steel inner tank
5.Bi-integral A/D converter Joan Lab Thermostatic Water Bath With Magnetic Stirrer Technical Data Model WBS-6pro Motor type Brushless Motor Speed 100-1200 RPM Increment 50 RPM Liner size 200 X 200 X 130mm(depth)-2L flask or 3L beaker Product size 260 X 265 X 325mm Temperature range Room temperature +5°C - 100°C Display Accuracy ±0.1℃ Temperature stability ±1℃ Control mode Digital control panel + Key Timing 1min - 23h59min Power 800 W Allowed ambient humidity temp. 5 ~ 40℃ 80%RH

Laboratory Portable Incubator

1. Internal naturally air convection,four sides heating method,to make inner temperature uniformity.
2. Mirror stainless steel inner chamber,four corners arc transition easy to clean.
3. PID controller,with over-temperature protection function,with over-temperature alarm, sensor fault alarm,fixed value operation,regular operation,deviation correction, menu locking and other functions.
4. With high quality glass window and installed LED light on the door,easy to observe the sample inside,especially under dark conditions.
5. Portable design,the top handle is easy to move,optional 12V vehicle power supply, vehicle use is convenient.

Quick Details :
Classification : Laboratory Thermostatic Devices
Brand Name : FAITHFUL
Model Number : DH3000AB
Place of Origin : Hebei, China
Name : Laboratory Incubator Portable
Temperature Range : RT+5-70℃
Temperature accuracy : 0.1℃
Capacity : 12,8L
Inner Chamber : Mirror Stainless Steel
Power : 120W
Inner Size : 230*200*280mm
Exterior Size : 310*276*378mm
Shelf Number : 2
Shelf Space : 35mm

JOANLAB Glass Filterting Head For 1000 ml Vacuum Filtration Apparatus,
Membrane Filter,Sand-Core Filter Equipment,Lab Glassware

Classification: Laboratory
Color: Transparent
Height : 120 mm
Diameter : 60 mm
Diameter Sand Core : 40 mm
Ground Joint : 40/38
International standard dimension fo 1000ml vacuum filtration apparatus
Material : High borosilicate glass

GG3.3 high borosilicate glass is also popular as hard glass, with excellent performance: low expansion ratio, high temp. resistance, high hardness, high transparency, high chemical stability.

Sterile MCE Membrane Filter
Merk Microlab Scientific Diameter 47 mm Porosity 0,45 um Isi 100pcs/pack ED 2025
Introduction :

1. Composition mixed cellulose esters including cellulose nitrate and cellulose acetate
2. Color Black White Diameter:47mm .
3. High porosity provides superior flow rates.
4. High protein binding can be blocked by pretreatment or utilized in applications.
5. High purity:Triton-free
6. Hydrophilic Gridded filters have clearly defined grid lines spaced at 3.1mm intervals.
7. Gamma sterilization

Sound amp;light alarm temperature data logger with external probe
Model DWL-10E
Brand YOWEXA

Applications
These data loggers are used mainly to monitor and verify temperature(or humidity) sensitive goods, equipment or areas. Example: Refrigeration, Warehouse, HVAC, Food amp;Pharmaceutical.

Features
● Large scale HTN LCD display
● Sound and light alarm when exceeding limit.
● Real time clock
● USB interface communicate with PC
● Free software to setup, download and analyze
● Set access password fo each data logger
● LCD shows readings, status and alarm
● Start method: immediately, button, start at time

Specifications
Channels : Temperature (ext.)
Range : -40~125℃
Accuracy : ±0.5℃
Resolution : 0.1℃
Operation environment : -30~70℃
Storage environment : -30~70℃
Size(mm) / weight : 120X74X24 / 130g
Protection Class : IP30
Interface : USB(it can power for device)
Battery : AAA battery
Certificate and standard : CE, ROHS, REACH
Readings memory(total for all channels) : 32000
Software ：DGraph(free)
OS ：windows xp/7/8/10/vista 32bits/64bits

Sound amp;light alarm temperature and humidity data logger with external probe
Model DWL-20E
Brand Yowexa

Applications
These data loggers are used mainly to monitor and verify temperature(or humidity) sensitive goods, equipment or areas. Example: Refrigeration, Warehouse, HVAC, Food amp;Pharmaceutical.

Features
● Large scale HTN LCD display
● Sound and light alarm when exceeding limit.
● Real time clock
● USB interface communicate with PC
● Free software to setup, download and analyze
● Set access password fo each data logger
● LCD shows readings, status and alarm
● Start method: immediately, button, start at time

SPECIFICATION:
DWL-20E
Channel : Temperature and Humidity (External) Relative Humidity
Measurement Range : 0 to 100%RH
Range : -40 to 125℃(-40 to 257℉)
Accuracy : ±0.3℃ ±3% rh
Resolution : 0.1℃, 0.1% rh
Operation Environment : -30~70℃
Storage Environment : -30~70℃
Size(mm) / weight : 120X74X24 / 130g
Protection Class : IP30
Sensor Location : External
Interface: USB(it can power for device)
Battery: AAA battery
Certificate and standard: CE, ROHS, REACH
Readings memory(total for all channels): 32000
Software：DGraph(free)
OS：windows xp/7/8/10/vista 32bits/64bits

Digital Max Min thermometer - simultaneously displays actual, max and min temperature
Brand : ETI UK
Order Code : 810-110 White, 810-111 Green Ideal for home, office or garden two colours available displays actual, max and min temperature Incorporates a slot for hanging 0.1 °C or °F resolution large clear LCD display. This digital greenhouse thermometer is ideal to monitor temperature in your greenhouse,conservatory or grow room.

This digital max/min greenhouse thermometer simultaneously displays the actual temperature whilst displaying the max and min temperatures. Each unit measures temperature over the range of -20 to 69.9 °C with a 0.1 °C resolution and are ideal for recording temperatures of grow rooms, growing cabinets, greenhouses etc. The unit is housed in a green ABS case measuring 30 x 80 x 150 mm.
The instrument incorporates a slot for hanging.

Range : -20 to 69.9°C
Resolution : 0.1 °C/°F
Accuracy : ±1°C
Battery : 1.5 volt AAA
Battery life : 4000 hours
Dimensions : 30 x 80 x 150 mm
Weight : 90 grams

The ETI 8100 Plus pH Meter Kit includes a range of products designed to monitor pH, mV and temperature. The 8100 Plus pH meter is a three-in-one instrument that features a large easy to read, LCD display that indicates pH over the range of -2 to 16 pH with a resolution of 0.01 pH, mV over the range of -1000 to 1000 mV and temperature over the range of -39.9 to 149.9 C with a resolution of 0.1 C.
The LCD display features both low battery indication and an user selectable backlight.
range : pH: -2 to 16 pH, mV : 1000mV, temperature : -39.9 to 149.9C resolution : pH : 0.01pH, mV : 1mV, temperature : 0.1C accuracy : pH : 0.02pH, mV : 1mV, temperature : 0.4C (-9.9 to 69.9C) battery : 3 x 1.5 volt AAA battery life : maximum 5 years - 2500 hours sensor type: combination electrode / thermistor display : 12mm LCD backlight : Yes dimensions : 32 x 71 x 141mm weight: 230 grams case material : ABS plastic country of manufacture : United Kingdom water/dust resistance : IP66/67 protection measurement scale : pH mV and temperature The 8100 Plus pH meter is a complete kit which Includes : - 8100 Plus pH meter (225-085) - temperature probe (170-100) - general purpose pH electrode (823-501) - 4.01 pH buffer solution (816-050) - 7.00 pH buffer solution (816-051) - carrying case (830-080)

Pocket Conductivity Meter
Brand Yoke
Model P312
Specification:
Measuring Range: Conductivity (0 ~ 10)mS/cm: (0~99.9)μS/cm (100~999)μS/cm (1.00~10.00)mS/cm Resolution: 0.1/1μS/cm; 0.01mS/cm
Accuracy: ±3%FS
Temp. Compensation: 0 ~ 60℃
Calibration: 1 Point (1413μS/cm)
Power: Lithium batteries (CR2032)
Humidity: 85% IP grade: IP57

Order Code: 298-111
Brand: ETI (UK)
two external remote probes remote sensor range -40 to 125 C email alerts when alarm limits exceeded access temperature data worldwide via internet programmable high/low alarm user friendly, simple setup perfect for HACCP analysis optional UKAS 5 point certificate available The new ThermaData WiFi loggers utilise the latest WiFi wireless technology.
The loggers are a battery powered, cost-effective, temperature monitoring system that remotely records the temperature of appliances and buildings. Each logger transmits the recorded data to a WiFi router connected to the internet which can be accessed and viewed from a PC, laptop or tablet anywhere in the world. At programmable intervals, the loggers will record temperature from both sensors, recording up to a maximum of 18000 readings (9000 from each sensor). Each unit is supplied with a USB lead. ThermaData Studio software is available to download FREE from our website and is licence free, no ongoing or subscription charges.
How does the ThermaData WiFi logger work? Using the unique ID of each logger ThermaData Studio creates a secure connection between logger and software which can be accessed and viewed anytime and anywhere with an internet connection. Each logger communicates directly to the WiFi router at set intervals to push data through the internet into ThermaData Studio. The information is available to be analysed and exported into a report format.
Specification :
range external: -40 to 125C
resolution: 0.1 C/F
accuracy: 0.5C
memory: 18000 or 2 x 9000
readings sample rate: 0.1 to 330 minutes
battery: 2 x 1.5 volt AA
battery life: approximately 12 months
display: 12 mm LCD/2 LED #39;
dimensions: 29 x 72.5 x 96mm
weight: 165 grams
case material: ABS plastic country of manufacture: United Kingdom measurement scale: Celsius/Fahrenhei

Stainless Steel Syringe Filter Holder, 25 mm Filter holder used to vacuum filter small volumes of liquids for precise particulate contamination analysis. Stainless steel pressure filter holders are ideally used for filtering or cleaning small volumes of liquid, clarifying turbid solutions, and purifying virus solutions. Stainless steel offers excellent chemical and temperature compatibility and durable construction for years of use.

Applications :
Point-of-use filtration on sterile filling machines In-line filter between pressure source and dispensing vessel Ultracleaning and sterilization of compressed gases Flow decay studies for scale-up (sanitary) KS 25 is recommended to clarify and sterilize small liquid volumes (clearing serums, purifying viral solutions)

Specifications :
Material 316L Stainless steel Filter Size 25 mm O-Ring Seal PTFE Inlet/Outlet Female Luer Lock/ Male Luer Slip Max Pressure Diff. (psi) lt;42 Filtration Area (cm2) 3.9

Membrane Filter
Brand : Labfil (Alwsci)
Material : PTFE ( Hydrophilic )
Diameter : 47 mm
Pore Size : 0.45 um
- Membrane filters or membranes are polymer films with specific pore ratings.
- Membranes retain particles and microorganisms theat exceed their pore ratings by acting as a
physical barrier and capturing such particles on the surface of the membrane.
- Labfil membrane are available in variety of polymers, pore sizes, diameters and surface types.
Compatible with strong acids and aggressive solvents
Aplication for gas, air and solvent filtration
Qty : 100 pcs/pack

Deskripsi :
Hand held Vacuum Pump Hand Vacuum Pump Lab Hand-held Vacuum Pump,Handle Vacuum Pressure Pumps,550mm Hg This vacuum pump could be used for vacuum suction filtration Max vacuum 550mm Hg Package 1 x Hand-held Vacuum Pump 1 x Vacuum Hose

Set Vacuum Filtration
Brand Name : Nalgene
1. Reusable 250mL Filter Funnel with Clamp, 47mm Diameter, Thermo Scientific Cat. no. DS0315-0047
Funnel capacity : 250ml ; diameter : 47mm Material : polypropylene copolymer cover, polysulfone funnel, TPE cap, silicone gasket, number 8 rubber stopper, and aluminum clamp For use in microbial and particulate analysis; break-resistant, transparent, and non-toxic; exhibits low protein binding and is easy to clean Graduated upper reservoir; no leakage or bypass even after autoclaving Membrane support plate firmly holds 47mm membrane; snug-fitting cover has three ports

2. Plastic Filtering Flask with Side Arm Tubulation, Polypropylene, 1000mL, Thermo Scientific Cat. No. DS4101-1000 Capacity : 1000mL; fits tubing I.D.: 1/4 to 3/8 inch (6.4 to 9.5mm); stopper number: 8 Material : polypropylene Molded in one piece to withstand full vacuum to 30 inches Hg The 45 degree angle of tubulation prevents tipping Non-graduated; has an oval marking area; barbed adapter; autoclavable

MATRIX MTR-100 10-Channel Handheld Temperature Recorder Data Logger, 0.01 Resolution, -200 to1820, 100ms High Speed, Triple Display List/Curve/Bar, 8 Thermocouple Types, 5" Touch Screen, Fast Charge

0.01 high resolution, ±0.2 high precision. Wide measurement range from -200 to1820. 100ms high sampling speed
Three display formats: list, curve, and bar chart. Can draw real-time display curves
Supports multiple types of thermocouple inputs: K, J, E, T, N, S, R, B
10 channels can be connected to different types of thermocouples
Supports 18W fast charging and continuously record for about 12h
Industrial grade 5-inch IPS touch screen
Super strong anti-interference ability
Adopting 32-bit high-speed MCU data processing and 24 bit high-speed AD measurement chip

Harga tertera adalah untuk 1 set vacuum filtration Nalgene dan 1 pcs Hand vacuum pump Joan

1#. Vacuum Filtration Brand Nalgene - Reusable 250mL Filter Funnel with Clamp, 47mm Diameter, Thermo Scientific Cat. no. DS0315-0047 Funnel capacity : 250ml ; diameter : 47mm Material : polypropylene copolymer cover, polysulfone funnel, TPE cap, silicone gasket, number 8 rubber stopper, and aluminum clamp For use in microbial and particulate analysis; break-resistant, transparent, and non-toxic; exhibits low protein binding and is easy to clean - Plastic Filtering Flask with Side Arm Tubulation, Polypropylene, 1000mL, Thermo Scientific Cat. No. DS4101-1000 Capacity : 1000mL; fits tubing I.D.: 1/4 to 3/8 inch (6.4 to 9.5mm); stopper number: 8 Material : polypropylene Non-graduated; has an oval marking area; barbed adapter; autoclavable

2#. Handheld Vacuum Pump with indicator Gauge Brand Joan Lab This hand operated vacuum pump with a vacuum gauge is a very economical way of providing a vacuum in your laboratory or home lab. Use this hand vacuum pump for vacuum filtration or physics experiments. The hand operated vacuum pump is made of a durable polychloroethylene plastic. It is designed for pulling a partial vacuum, of up to 500 mm Hg, on small closed systems of about 600 ml or less. Each pump of the handle displaces 15ml in volume. A vacuum gauge on the pump reads in both Pascals (0.1-0 MPa) and mm of Hg (760-0 mm Hg) to indicate actual vacuum. A quick-release valve provides vacuum release without disconnecting the pump.

MDB100 Mini Dry Bath Incubator with Block 15 x 2 ml, Drybath Incubator

Dry Bath Incubator
Model MDB100
Temperature range Room temp + 5℃~100℃
Temperature stability ± 0.5℃
Display precision 0.1 ℃
Heating up time ≤ 12min(25℃ - 100℃)
Multi program running No
Timing range 1s - 23h59min
Power 48W
The power supply AC100-240V/1.5A turn to DC24V/2.5A
Module dimensions 71*47*32 mm
Product size 160*115*96 mm

Adaptive module
MDB1- Centrifuge tube:0.2ml*40
MDB2 - Centrifuge tube:0.5ml*24
MDB3 - Centrifuge tube:1.5ml*15
MDB4 - Centrifuge tube:2.0ml*15